DUAL CAMERAS INLINE AOI EKT-VL-900D；It is mainly used in DIP double-sided wave solder joints to detect the appearance quality of PCBA at the same time,and SMT double-sided solder joint appearance inspection, no need to turn over;The main features are as follows:
- Up and down dual cameras, independent XY motion platform.
- It is common to inspect the errors and omissions of plug-in components on the top side, inspect the wave soldering joint on the bottom side, and inspect both sides at the same time.
- Fully compatible with the functions of single track online AOI 8 series.
|Application||After stencil printing, pre/post reflow oven, pre/post wave soldering, FPC etc.|
|Program mode||Manual programming, auto programming, CAD data importing, two side PCB independent programming.|
|Inspection Items||Stencil printing: Solder unavailability, insufficient or excessive solder, solder misalignment, bridging, stain, scratch etc.|
Component defect: missing or excessive component, misalignment, uneven, edging, opposite mounting, wrong or bad component etc.
Soldering defect: excessive or missing solder, empty soldering, bridging, solder ball, IC NG ,copper stain etc.
|Calculation Method||Machine learning, color calculation, color extraction, gray scale operation, image contrast, OCV/OCR etc.|
|Inspection mode||The monorail automatically enters the board and inspects the upper and lower sides of the PCB board at the same time, PCB fully covered, with array and bad marking function|
|SPC statistics function||Fully record the test data and make analysis, with high flexibility to check production and quality status|
|Component Angle||Support 0 ~ 359 ° rotation, with a minimum angle distance of 1 °|
|Minimum component||01005 chip, 0.3 pitch IC|
|Camera||2 sets of full color high speed industrial digital camera , 5 million pix/12 million pix/ 20 million pix camera are optional.|
|Lens resolution||10um/15um/18um/20um/25um, can be customized|
|lighting source||Annular stereo multi-channel color light, RGB/RGBW/RGBR/RWBR base on demand, optional top axial light.|
|VGA||Build in graphic card, (discrete graphic optional)|
|CPU||Intel E3 or same level|
|HDD||1TB ， (SSD optional)|
|Language||Chinese and English|
|Access right control||Administrator, programmer and operator three-level login permission control|
|Moving and inspection mode||Automatically PCB in/out, direction optional L-R / R-L, stepper motor transports PCB and adjust track width, under PCB track, 2 sets XY servo motor drives top and bottom camera to take pictures.|
|PCB fixed mode||Automatic fixture|
|PCB dimension||50*50mm(Min)～430*400mm(Max)， can be customized|
|PCB edge||3mm，can be custom-made base on need|
|PCB bending||＜5mm or 3% of PCB Diagonal length|
|PCB component height||Top：90mm，Bottom：35mm , adjustable, can be customized base on need|
|XY driving system||AC servo motor, precise ball screw|
|XY moving speed||Max：830mm/s|
|XY positioning accuracy||≦8um|
|Machine dimension||L1325 * W980 * H1600 mm|
|PCB height from ground||900±20mm|
|Communication with production line device||Smema|
|Air pressure||0.4 – 0.8 MPa, optional electric control to instead air pressure requirements|
|Safety standard||CE safety standard|
|Environment temperature and humidity||10～35℃，35～80％ RH (un- condensing)|
|Optional||Maintenance station, offline programming system, SPC servo, bar code system, MES connection.|
The above contents are the features and technical parameters of the dual cameras inline aoi EKT-VL-900D equipment. For more detailed contents, please call for consultation and communication, and the online customer service will serve you online.